山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 常见问题 >

2.6方自动上料搅拌车跑车之前需要检查什么?

所属分类:常见问题 发布时间:2020-12-07 来源:http://www.shanqijituan.com 浏览量:18

传统搅拌车的市场缺陷主要体现在环境的差异化,混凝土搅拌车出入的工地等地方路况较复杂,受施工等的影响,道路一般较窄,路面环境等也不好。一般的单车还好,半挂的驾驶难度更大,转弯半径也更大,进出工地不太适合。特别是工地,如果遇到下雨,泥泞路面,半挂车更容易打滑陷车。
The market defects of traditional mixer truck are mainly reflected in the difference of environment. The road conditions of the construction site and other places where the concrete mixer truck goes in and out are relatively complex. Affected by the construction, the road is generally narrow and the road environment is not good. Ordinary bicycles are OK. It's more difficult to drive half trailer, and the turning radius is bigger. It's not suitable to enter and leave the construction site. Especially in the construction site, in case of rain and muddy road, the semi-trailer is more likely to slip and sink.
2.6方自动上料搅拌车的出现,解决了这些建筑施工难题。自动上料搅拌车是由山东鲁樽机械自主研发的一款多功能混凝土上料搅拌一体车。
The emergence of 2.6 square automatic feeding mixer solves these construction problems. The automatic loading mixer is a multifunctional concrete loading and mixing truck independently developed by Shandong Lu Zun Machinery Co., Ltd.
2.6方自动上料搅拌车在使用之前为了确保正常的运行过程,需要对设备提前做一定检查工作的。那么接下来就让我们一起了解一下当设备在运行之前有哪些问题是需要我们检查了解的。
自动上料搅拌机
In order to ensure the normal operation process of the automatic feeding mixer, it is necessary to check the equipment in advance. So let's learn what problems we need to check and understand before the equipment is running.
1、蓄电池的保养检查:检查蓄电池固定是否牢固。
1. Battery maintenance inspection: check whether the battery is fixed firmly.
2、轮胎的检查:每月应在常温下检查一下轮胎气压。
2. Tire inspection: check the tire pressure at room temperature every month.
3、离合器的检查:离合器液面处于高、低液面间是代表正常的,要是低于标准线,可能是总泵或分泵的皮碗有问题。
3. Clutch inspection: clutch liquid level between high and low is normal, if lower than the standard line, it may be the master cylinder or sub cylinder cup problem.
4、制动液面的检查:制动液在高、低位之间则表示正常。
4. Inspection of brake fluid level: if the brake fluid is between high and low, it means normal.
5、发动机冷却液液面检查:发动机在政策状态时,一定不要打开散热器,可能会被溅出的冷却液或高温蒸气烫伤。等发动机冷却后,检查冷却液的液面是在什么位置,看是否需要加蒸馏水或纯净水或冷冻液,加水后的高度不能超过满位。发现短时间内冷却液减少的很快,应检查冷却设备是否有泄漏或直接到维修站去看。
5. Engine coolant level check: when the engine is in the policy state, the radiator must not be opened. It may be scalded by the splashed coolant or high temperature steam. After the engine cools down, check the coolant level to see if it needs to add distilled water or pure water or refrigerant. The height after adding water should not exceed the full level. If it is found that the coolant decreases rapidly in a short time, check whether the cooling equipment has leakage or go to the maintenance station directly.
2.6方料搅拌机操作环境通常都不是很好,这也导致需要我们对设备在操作之前有详细的了解才行。在确保设备不存在有任何故障问题之后才能够操作使用设备正常运行,避免在操作中可能存在的各种不良问题。
2.6 the operating environment of the square mixer is usually not very good, which also requires us to have a detailed understanding of the equipment before operation. After ensuring that the equipment does not have any fault problems, it can be operated and used normally, so as to avoid all kinds of bad problems that may exist in the operation.
以上是小编分享的自动上料搅拌机,你还见过哪些新颖有趣的知识吗?,欢迎在点击网站的链接http://www.shanqijituan.com ,在留言中写下你要表达的内容.
The above is the automatic feeding mixer shared by Xiaobian. What new and interesting knowledge have you seen? , welcome to click on the website link http://www.shanqijituan.com  Write down what you want to say in the message
热门产品 / HOT PRODUCT

 

首页 产品 电话 置顶