According to the actual demand of data acquisition terminal of automatic feeding mixer, and considering the universality of the module, the technical indexes of the terminal are determined as follows.
（1）模块工作电压：本终端的工作电压来源于车载电瓶，通常为 12V 或者24V，模块电压应小于电源电压；
(1) Module working voltage: the working voltage of the terminal comes from the vehicle battery, usually 12V or 24V, and the module voltage should be less than the power supply voltage;
(2) Communication mode: wireless network and short message communication can be adopted（ 3) Terminal online rate: in order to ensure the real-time data communication between the terminal and the monitoring center, the terminal should maintain a high online rate;
(4) Packet loss rate: packet loss rate refers to the ratio of the number of lost packets to the number of sent packets in the test. In order to reduce the packet loss rate, it can be considered in the design that when the wireless transmission module cannot connect to the network, resulting in the terminal unable to log in to the system, the data will be sent to the server after the wireless transmission module is out of the blind area;
（5）定位精确度：车辆监控调度系统的电子地图精度数量级是米，我国二级道路的标准宽度为 30~60m，如果要对车辆进行准确的监控，定位精度需控制在30m 以内，否则，当两条道路的距离过近时，就可能出现定位错误，即正在某条公路上行驶的车辆被定为在道路外或其它道路上。
(5) Positioning accuracy: the accuracy of the electronic map of the vehicle monitoring and dispatching system is in the order of meters. The standard width of the secondary road in China is 30 ~ 60m. If the vehicle is to be monitored accurately, the positioning accuracy should be controlled within 30m. Otherwise, when the distance between the two roads is too close, positioning errors may occur, That is to say, the vehicles driving on a certain highway are classified as outside the road or on other roads.
The most important thing to buy products is quality. Choosing merchants is honesty. Automatic feeding mixer sincerely provides excellent service for customers. Welcome to visit our website: http://www.shanqijituan.com Below message consultation