山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 公司新闻

了解自上料搅拌机会发生侧翻的机率?

所属分类:公司新闻 发布时间:2020-09-04 来源:http://www.shanqijituan.com 浏览量:0

  自上料搅拌机车框架太大 ,轮距太小,过高车的稳定性结果就不言而喻了。这便是会发生侧翻的因素,这点是非常重要的,也是直接关系到了,具体还会如何来看看:
  Since the frame of the loading mixer is too large, the wheelbase is too small, and the center of gravity is too high, the stability results of the vehicle are self-evident. This is the factor that causes rollover, which is very important and directly related to safety. How can we look at it
  我们都知道车的框架是在轮胎之上的,而正因此与地面接触的就是轮胎。那么也就是说判断一个道路是否能过,主要就是看自己的轮距是否在这个道路宽度之内。从而我们也知道,一个混凝土搅拌车的环境适应能力,不仅仅受到发动机的影响,还受到轮距的影响,那么我们自然而然知道小型混凝土搅拌车轮距的选择有就非常重要了。
  We all know that the frame of a car is above the tires, and that's why the tires come into contact with the ground. That is to say, to judge whether a road can pass or not, the main thing is to see whether the wheel tread is within the width of the road. Therefore, we also know that the environmental adaptability of a concrete mixer is not only affected by the engine, but also affected by the wheelbase. Therefore, we naturally know that the selection of wheelbase of small concrete mixer is very important.
               全自动上料搅拌机
  轮距和车框架的搭配也是非常重要的。因为上面我们就说车框架是在轮胎之上的。那么合理的轮距承载多大的车框架,必须在合理承受范围之内。正所谓量体裁衣,对车的衣服就是车框架。如果衣服裁的不合理,对于车不仅仅就是不好看那么简单了,它的性也就大大下降。
  It is also very important to match the wheelbase and the frame. Because we said that the car frame is above the tires. So the reasonable wheelbase bearing capacity of the car frame, must be within the reasonable bearing range. It is the so-called tailor-made, the clothes of the car is the car frame. If the clothes are cut unreasonably, the car is not only ugly, so simple, its safety will be greatly reduced.
  以上是关于自上料搅拌机会发生侧翻的机率的介绍,希望对大家有所帮助,如您想要了解更多内容欢迎关注我们的网站。
  The above is the introduction of the probability of rollover of the mixing machine from feeding. I hope it will help you. If you want to know more, please pay attention to our website.

 

首页 产品 电话 置顶