山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 公司新闻

如何减少混凝土搅拌车机械的磨损?

所属分类:公司新闻 发布时间:2020-09-14 来源:http://www.shanqijituan.com 浏览量:0

  如何减少混凝土搅拌车机械的磨损。很多用户在使用爬梯式混凝土搅拌车时,会提出这样一个问题,怎样才能使设备减少更多的磨损,从而延长它的使用寿命呢,其实要确保该设备减少磨损,应该在磨合期时特别注意。
  How to reduce the wear of concrete mixer. Many users will ask such a question when using the ladder type concrete mixer. How can we reduce the wear of the equipment and prolong its service life? In fact, to ensure that the equipment reduces wear, special attention should be paid to it during the running in period.
  磨合期是各类混凝土搅拌设备工作必须通过的分阶段,在磨合期我们如何保证它的正常运行,故障率下降,延长使用寿命呢,我们来看一下磨合期常见的故障:润滑不良,由于新的总成零部件结合它们之间的配合间隙很小,并且由于装配等原因,难以保证间隙的均匀性,润滑油是不容易形成均匀的油膜,在摩擦表面上防止磨损,为了降低润滑效果,从而在早期的异常磨损的零件,造成了严重的摩擦表面划伤或磨损的精确配合,导致失败。
              全自动上料搅拌车
  The running in period is a stage in which all kinds of concrete mixing equipment must go through. In the running in period, how can we ensure its normal operation, reduce the failure rate and prolong the service life? First of all, let's take a look at the common faults during the running in period: poor lubrication, the fit gap between new assembly parts is very small, and due to assembly and other reasons, it is difficult to ensure the clearance The uniformity of lubricating oil is not easy to form a uniform oil film on the friction surface to prevent wear, in order to reduce the lubrication effect, thus in the early abnormal wear of parts, resulting in serious friction surface scratch or wear precise fit, leading to failure.
  由于水泥搅拌车的新设备零部件加工、装配和监管的影响因素,如摩擦表面的接触面积较小,表面压力的不平等地位磨损较快,此时如果超负荷运行,它可能会造成零件损坏,导致早期故障发生,所以当使用的设备处于磨合期时,一定不能使用该设备进行超负荷的工作,这样对于设备的使用寿命会大打折扣。
  Due to the influence factors of parts processing, assembly and supervision of the new equipment of cement mixer truck, such as small contact area of friction surface and uneven surface pressure, it may cause damage to parts and cause early failure if it operates under overload. Therefore, when the equipment used is in the running in period, it must not be used for overload This will greatly reduce the service life of the equipment.
  以上是关于如何减少混凝土搅拌车机械磨损的内容,希望对大家有所帮助,如想了解更多内容欢迎点击全自动上料搅拌车http://www.shanqijituan.com网站。
  The above is about how to reduce the mechanical wear of concrete mixer, hope to help you, if you want to know more, welcome to click the automatic loading mixer http://www.shanqijituan.com Website.

 

首页 产品 电话 置顶