山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
在线询价
您现在所在的位置: 首页> 新闻资讯 > 公司新闻 >

中科全自动上料搅拌车的优势特点有哪些?

所属分类:公司新闻 发布时间:2020-11-23 来源:http://www.shanqijituan.com 浏览量:18

一、罐体倾斜角度小,低,行驶及转动稳定
1、 The tank has small inclination angle, low center of gravity, stable driving and rotation
罐体采用德国施维英工艺,根据不同底盘做特殊优化,采用专用工装,保证了罐体倾斜角度小,更低,不易侧翻。减少焊接面积,大大增加了搅拌罐的强度。钢材采用先进的等离子切割技术,保证生产效率的同时,减小因热力而使钢材产生形变的误差。
The tank body adopts German schweiin process, makes special optimization according to different chassis, adopts special tooling, ensures that the tank body has small tilt angle, lower center of gravity, and is not easy to roll over. The welding area is reduced and the strength of mixing tank is greatly increased. Advanced plasma cutting technology is adopted to ensure the production efficiency and reduce the deformation error caused by heat.
二、搅拌、进出料性能优越
2、 Excellent mixing and feeding performance
封头、筒体、叶片均采用Q345合金钢制作,耐磨和抗屈服强度好,使用寿命长。叶片采用双对数,阿基米德螺旋线,搅拌性能优越,进料速度大于2.7立方每分钟,出料速度大于1.8立方每分钟,残余率低。
The head, cylinder and blade are made of Q345 alloy steel with good wear resistance and yield strength and long service life. The blade adopts double logarithm and Archimedes helix, which has excellent mixing performance. The feeding speed is more than 2.7 cubic meters per minute, and the discharging speed is more than 1.8 cubic meters per minute. The residual rate is low.
全自动上料搅拌车
三、副车架抗扭能力强
3、 The subframe has strong torsion resistance
副车架的纵、横梁采用16Mn材质的矩形管制作,一体成型,无拼焊,关键受力部位应用斜拉结构,使车架具有较强的抗扭转,抗撕裂能力。副车架与底盘连接结构可靠,减轻上装部分的扭转对底盘的影响,从结构上延长了底盘的使用寿命。
The longitudinal and cross beams of the subframe are made of 16Mn rectangular tubes, which are formed in one piece without welding. Cable stayed structure is applied to the key stressed parts, so that the frame has strong anti torsion and anti tearing ability. The connection structure between the subframe and the chassis is reliable, which can reduce the influence of the torsion of the upper part on the chassis and prolong the service life of the chassis structurally.
四、进出料系统
4、 Feeding and discharging system
进料斗空间大,设计角度合理,是进料速度加快,不易发生堵料和溢出现象;溜槽能进行180度旋转,带限位装置,上下左右均可调整,其上设有锁止装置,在车辆行驶过程中将其固定锁紧,以确保行驶安全可靠。
The feeding hopper has large space and reasonable design angle. It is characterized by fast feeding speed and less material blocking and overflow. The chute can be rotated 180 degrees with a limit device, which can be adjusted up and down, left and right. There is a locking device on the chute, which can be fixed and locked during vehicle driving to ensure safe and reliable driving.
五、液压系统
5、 Hydraulic system
液压传动系统采用流体动力领域的全球知名品牌,让高品质的可靠性得以传承.
Hydraulic transmission system adopts the world famous brand in the field of fluid power, so that high quality reliability can be inherited
六、操纵系统
6、 Control system
操纵系统采用定位准确、控制可靠的杆式控制系统,控制点在驾驶室内、车尾两侧共三处。控制系统结构紧凑、操作灵活、控制可靠。
The control system adopts rod type control system with accurate positioning and reliable control. The control points are in the cab and at both sides of the rear. The control system is compact in structure, flexible in operation and reliable in control.
感谢您的阅读,此文的文章来源:全自动上料搅拌车更多的内容和问题请点击:http://www.shanqijituan.com 我们会继续努力的为您提供服务,感谢您的支持!
Thank you for your reading. This article is from automatic feeding mixer. For more information and questions, please click: http://www.shanqijituan.com  We will continue to work hard to provide services for you, thank you for your support!
热门产品 / HOT PRODUCT

 

首页 产品 电话 置顶