山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 公司新闻 >

自动装载移动式混凝土搅拌车介绍

所属分类:公司新闻 发布时间:2021-09-06 来源:http://www.shanqijituan.com 浏览量:18

1、搅拌单元: 搅拌仓容量 3450立升,混凝土输出量2.5立米/次。 双螺旋结构。液压电机,行星齿轮传动。 正反转实现搅拌,卸料。搅拌筒300°回转,在车辆四周1.9米以上高度倾倒混凝土。
1. Mixing unit: the capacity of mixing bin is 3450l, and the concrete output is 2.5m3/time. Double helix structure. Hydraulic motor, planetary gear drive. Mixing and unloading are realized by forward and reverse rotation. The mixing drum rotates 300 ° and dumps concrete at a height of more than 1.9m around the vehicle.
2、发动机:珀金斯涡轮增压柴油机 1104 D-44 TA, 水冷式四缸,功率 62.5千瓦, 84马力。后置。
2. Engine: Perkins turbocharged diesel engine 1104 d-44 TA, water-cooled four cylinder, maximum power 62.5 kW, 84 HP. Post.
3、传动系统; 采用德国博士 力士乐液压元件。 发动机带动2套系统(4驱动行走和搅拌)工作。
3. Transmission system; German doctor Rexroth hydraulic components are adopted. The engine drives 2 sets of systems (4 drive walking and mixing) to work.
4、速度: 工作速度0-9公里/小时, 路上行走速度 0-25公里/小时。
4. Speed: the working speed is 0-9 km / h, and the walking speed on the road is 0-25 km / h.
5、驾驶席:前置具有Rops-Fops(防翻滚-防坠落)保护标准双开门司机室。
5. Driver's seat: front double door cab with international ROPS FOPS (anti roll - anti fall) protection standard.
6、液压系统: 3回路,2个可变输出泵 分别带动传动系统和 回转系统。2齿轮泵负责进出过滤系统,和水热油的热交换。
自动上料搅拌机
6. Hydraulic system: three circuits and two variable output pumps drive the transmission system and the rotation system respectively. 2 gear pump is responsible for the heat exchange with water and hot oil in and out of the filtration system.
7、操纵杆: 料斗的所有液压控制动作由一个操纵杆完成。
7. Control lever: all hydraulic control actions of the hopper are completed by one control lever.
8、计量: 电子称重单元为可选部件,具有司机室输出打印功能。
8. Metering: the electronic weighing unit is an optional component and has the output printing function in the cab.
9、布料斗: 400立升带有液压控制闸门的料斗。
9. Distribution hopper: 400 liter hopper with hydraulic control gate.
10、出料滑道: 液压控制可回转.由2个销轴固定,易拆卸来增加卸料高度。
10. Discharge chute: it can rotate under hydraulic control. It is fixed by two pin shafts and easy to disassemble to increase the discharge height.
11、供水: 车载水供应系统,附带水表,高压水枪(可选件)
11. Water supply: vehicle mounted water supply system, with water meter and high-pressure water gun (optional)
12、可爬行坡度:满载时30%
12. Crawling slope: 30% at full load
13、制动系统: 油浴式盘式制动器。双轴不同回路控制。 负液压停车制动系统
13. Brake system: oil bath disc brake. Dual axis different loop control. Negative hydraulic parking brake system
14、轮胎:工程工业用胎12.5-20 PR 12.
14. Tire: engineering industrial tire 12.5-20 PR 12
15、转向系统: 静流体液压 3向转向,回转半径内部 1500mm 外部3500mm
15. Steering system: hydrostatic 3-way steering, with a turning radius of 1500mm inside and 3500mm outside
16、电力系统: 12V 120 Ah 电池提供路上照明和发动机启动,紧急制动
16. Power system: 12V 120 ah battery provides road lighting, engine start and emergency braking
17、油,水箱:水 2×270立升 , 柴油 105立升,液压油 80立升。
17. Oil, water tank: water 2 × 270 litres, 105 litres of diesel, 80 litres of hydraulic oil.
18、底盘: 满足工程需要特制钢质底盘
18. Chassis: special steel chassis to meet the needs of the project
19、重量:6100公斤 均匀分布在2轴上。
19. Weight: 6100kg, evenly distributed on 2 axes.
20、安全规范:本机械配备自动检测和满载自动锁死阀门系统。如铲臂工作时,可自动控制搅拌筒旋转。
20. Safety specification: This machine is equipped with automatic detection and full load automatic locking valve system. If the shovel arm works, it can automatically control the rotation of the mixing drum.
热门产品 / HOT PRODUCT

 

首页 产品 电话 置顶