1. Before loading, the full-automatic loading mixer shall check whether the tank is clean. If there are other materials in the tank or materials left after the last mixing, the tank should be cleaned to ensure that the tank is clean before loading new materials.
2. Loading and mixing of materials with water or other liquids shall be carried out as required. The automatic feed mixer can control the amount and quantity of materials, and carry out feeding and mixing in strict accordance with the material ratio. And double check.
3.自动给料搅拌机拌料，为了防止材料离析和凝固，所以在输送过程中，搅拌缸应低速旋转(3 ~ 6r/min)，商用混凝土搅拌机的重型车辆速度不应超过50km/h。
3. In order to prevent segregation and solidification of materials, the mixing tank shall rotate at a low speed (3 ~ 6R / min) and the speed of heavy vehicles of commercial concrete mixer shall not exceed 50km / h.
4. Before discharging, the mixing cylinder shall rotate at high speed for 30 seconds, and then reverse discharging. If there is sedimentation or slump loss of concrete or other materials in the tank, it is not suitable to pump them. Adjust them and rotate them at high speed for 3 minutes before discharging.
5. The driver shall not add water to the car on the road or on the site, and shall not stop or eat (especially at night) without reason.
The above is the relevant content introduced by the manufacturer of full-automatic charging mixer. If you want to know more, please visit the website: http://www.shanqijituan.com