山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 公司新闻

如何检测全自动上料搅拌车变速箱油质?

所属分类:公司新闻 发布时间:2020-06-28 来源:http://www.shanqijituan.com 浏览量:0

  全自动上料搅拌车变速箱的油质要怎样检查?
  How to check the oil quality of the gearbox of the full-automatic loading mixer?
  1.将自动上料搅拌车放在平坦的地面上并拧紧手刹。
  1. Place the automatic loading mixer on the flat ground and tighten the handbrake.
  2.让发动机怠速运转几分钟。
  2. Let the engine idle for a few minutes.
              全自动上料搅拌车
  3.踩下制动踏板,将操纵杆转到倒档,前进档等位置,在每个档中停留几秒钟,然后在变矩器和所有换档执行器中注满液压油,,将操纵杆转到停车位置。
  3. Depress the brake pedal, turn the control lever to the reverse, forward and other positions, hold it in each gear for a few seconds, then fill the torque converter and all shift actuators with hydraulic oil, and finally turn the control lever to the parking position.
  4.从加油管中取出自动变速箱量油尺,将清洁过的量油尺插入加油管,然后将其拉出以检查量油尺的油位。
  4. Take out the automatic transmission dipstick from the filler tube, insert the cleaned dipstick into the filler tube, and then pull it out to check the oil level of the dipstick.
  以上是关于检查全自动上料搅拌车变速箱油质的相关介绍,想要了解更多内容欢迎点击我们网站。
  The above is about checking the transmission oil quality of the full-automatic loading mixer. For more information, please click our website.

 

首页 产品 电话 置顶