Thank you for your busy time to watch our website information. Next, let's learn more about the automatic charging mixer. If you like, please have a look!
Add a bottle of water tank strong plugging agent into the water tank when the water leakage in the charging mixer does not exceed 1 mm crack or 2 mm hole, and start the mixer truck to run.
5-10 minutes after opening the cooling water to start large-scale circulation, the water tank, rubber pipe and all pads in the cooling system will stop leaking if there is water leakage (or antifreeze) in the cooling system. After stopping the leakage, it does not need to be discharged, which will not affect the heat dissipation and block.
If there is no leak proof agent to carry, the individual heat pipe slight water leakage, can temporarily use loose tobacco into the water tank, use the water circulation pressure to make the cut tobacco block in the leakage of the heat pipe, for temporary use. If the water leakage of the radiator pipe of the water tank from the charging mixer is serious, the leaking heat pipe can be cut off from the water leakage place, and then the head of the heat dissipation pipe is clamped flat with pliers, and then the water leakage can be stopped by crimping and pressing.
If there is water leakage in the rubber pipe joint, the rubber pipe joint clip can be wrapped twice in the rubber pipe joint with a screw driver in time, and then the clamp is used to tighten it. If the rubber tube is damaged, the rupture can be wrapped up with adhesive tape for temporary use.
The above is about the automatic charging mixer water tank leakage how to deal with the details, hope to help you, want to learn more, please continue to pay attention to our http://www.shanqijituan.com Website.