山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
在线询价
您现在所在的位置: 首页> 全自动上料搅拌车 > 行业新闻 >

混凝土搅拌车放料杆如何操作?

所属分类:行业新闻 发布时间:2020-08-24 来源:http://www.shanqijituan.com 浏览量:18

  运输混凝土的话,一般都不会选择普通的卡车,而是使用混凝土搅拌车,边搅拌混凝土边运行的这种车辆。这样不仅能够及时搅拌混凝土,防止混凝土变干,而且能够更加安全地将其运行到目的地。如何操作它的放料杆?以下内容中将会介绍到这个知识:
  When transporting concrete, we usually don't choose ordinary truck, but use concrete mixer truck, which runs while mixing concrete. In this way, not only can the concrete be mixed in time to prevent the concrete from drying, but also it can be more safely run to the destination. How to operate its discharge rod? This knowledge will be introduced in the following:
  1、混凝土搅拌车启动前,应将搅拌操纵杆放在“空档”位置;
  1. Before starting the concrete mixer truck, the mixing control lever should be placed in the "neutral" position;
  2、启动后,应将搅拌操纵杆放在“卸料”位置,放去筒内积水;
  2. After start-up, the mixing control rod should be placed in the "unloading" position to drain the water in the cylinder;
            全自动上料搅拌机
  3、装料时,搅拌操作杆应放在“装料”位置;
  3. When loading, the mixing operating rod should be placed in the "loading" position;
  4、运输前,混凝土搅拌车卸料槽必须固定在“行驶”位置,防止摆动;
  4. Before transportation, the discharge tank of concrete mixer truck must be fixed at the "running" position to prevent swing;
  5、操作操纵杆时,应在“空档”位置稍作停留后方可动至下一个位置。
  5. When operating the control lever, it should be in the "neutral" position for a while before moving to the next position.
  大家在操作放料杆的时候,请严格按照步骤进行。混凝土搅拌车的放料杆,只有用户正确进行操作,才能让车的效率更高,大家在操作过程中一定要找准位置。
  Please strictly follow the steps when operating the discharging rod. Only when users operate the discharging rod correctly, can the efficiency of the truck be higher. We must find the correct position in the operation process.
热门产品 / HOT PRODUCT

 

首页 产品 电话 置顶