山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
在线询价
您现在所在的位置: 首页> 新闻资讯 > 行业新闻 >

全自动上料搅拌车容易出现哪些问题?

所属分类:行业新闻 发布时间:2020-10-07 来源:http://www.shanqijituan.com 浏览量:18

  全自动上料搅拌车容易出现哪些问题,小型搅拌车的搅拌筒不转是什么原因呢。根据小编多年经营小型混凝土搅拌车经验分析有以下几条原因。
  What are the problems of the automatic feeding mixer and the reason why the mixing drum of the small mixer does not rotate. According to the experience of operating small concrete mixer truck for many years, the following reasons are analyzed.
  1.油位过低,吸油管没按要求放置!
  1. The oil level is too low, and the oil suction pipe is not placed as required!
  2.吸油管断裂或被挤压!
  2. The oil suction pipe is broken or squeezed!
  3.全自动上料搅拌车滤油器太脏!
  3. The oil filter of the automatic feeding mixer is too dirty!
                全自动上料搅拌车
  4.连接泵的传动轴断裂!
  4. The drive shaft connecting the pump is broken!
  5.传动马达旋转方向不对,辅助泵损坏!
  5. The rotation direction of the drive motor is wrong, and the auxiliary pump is damaged!
  6.主泵高压阀损坏,或者太脏!
  6. High pressure valve of main pump is damaged or too dirty!
  7.松开调节杠杆,与其控制连接断开!
  7. Release the adjusting lever and disconnect it from its control connection!
  以上是关于全自动上料搅拌车容易出现的问题,希望对大家有所帮助,如您还有其他疑问欢迎咨询我们的www.shanqijituan.com网站。
  The above is about the automatic feeding mixer prone to problems, hope to help you, if you have other questions, welcome to consult us www.shanqijituan.com Website.
热门产品 / HOT PRODUCT

 

首页 产品 电话 置顶