Ensure that the operator is focused
The state of operators of small concrete mixing pump truck is very important to ensure normal construction. The operators of small concrete mixing pump truck shall ensure their concentration during the construction of pump truck, and always pay attention to various parameters of pump truck, especially the data of pressure gauge of small concrete mixing pump truck. In case of abnormal data of the pressure gauge, corresponding measures shall be taken in time to avoid pipe blockage and ensure the normal construction of small concrete mixing pump truck. In case of pipe blockage, the operators of small concrete mixing pump truck shall deal with it in time according to the instructions or contact the after-sales personnel of the manufacturer of small concrete mixing pump truck for solution.
Correctly select the pumping speed of small concrete mixing pump truck
More haste, less speed. The same is true for the construction process of small concrete mixing pump truck. Never adjust the pumping speed too fast in the construction process because of the rush period and other reasons. Pay special attention when pumping for the first time. Since it is used for the first time, the resistance of all pipelines is relatively large, so it is necessary to pump at a low speed. Try to slowly increase the speed of pumping concrete after the pumping phenomenon is normal.
Control the amount of paint at all times
During the construction of small concrete mixing pump truck, the operator should always pay attention to the paint in the hopper, do not let the paint be lower than the mixing shaft, and of course, do not let the paint in the hopper accumulate too much. This is mainly because if there is too little paint in the hopper, it is easy to inhale air during pumping, resulting in pipe blockage. What happens if there is too much paint in the hopper? Too much is not conducive to timely cleaning of coarse aggregate and relatively large aggregate, and will also lead to pipe plugging. Therefore, it is very important to control the coating amount at all times.
Handle the problem of small concrete slump
During the construction of small concrete mixing pump truck, the operator must always pay attention to the slump of concrete in the hopper. If it is found that the slump of concrete in the hopper is very small and normal pumping cannot be carried out during the construction process, the operator shall not take measures of forced pumping or adding water for mixing construction, which is very easy to cause pipe blockage and affect the construction efficiency. So how to solve it? The constructor shall release the bottom of the concrete mixing hopper in time.
Attention to pipeline problems
During the construction of small concrete mixing pump truck, if it is necessary to stop, the stop time must be controlled, otherwise the concrete solidification in the pipeline will cause inconvenience in the next construction and pipe blockage. In addition, after the construction of small concrete mixing pump truck, the pipeline shall be cleaned in time, and the pipeline shall be cleaned to avoid pipe blockage in the next use.
The above information is the knowledge sharing provided by the automatic feeding mixer to Xiaobian. For more wonderful contents, please click our website: http://www.shanqijituan.com , we will have more content for you to check later