山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 行业新闻

维修混凝土搅拌罐车需要要注意几点

所属分类:行业新闻 发布时间:2022-11-04 来源:http://www.shanqijituan.com 浏览量:0

混凝土搅拌罐车使用时间长了,难免会出现一些故障,一旦搅拌罐车出现故障了,那么就要一时间维修。但是有些司机对于维修搅拌罐并不在行,常常进行了错误的操作,这样不但不能修好搅拌罐,反而会让问题更加严重。下面几点是维修搅拌罐要注意的事项。
The concrete mixing tank truck has been used for a long time, and it is inevitable that some failures will occur. Once the mixing tank truck fails, it needs to be repaired for a while. However, some drivers are not good at repairing the mixing tank and often make wrong operations, which not only can not repair the mixing tank, but will make the problem more serious. The following points are the precautions for maintenance of the mixing tank.
1、不能用水直接冲洗混凝土搅拌罐车身,搅拌罐车身内部机构是比较复杂的,凹槽、通孔设计比较多,一旦用水冲洗了,那么水分沉积在机身内不容易干燥,就容易使得零部件锈蚀。
1. The body of the concrete mixing tank cannot be directly washed with water. The internal mechanism of the mixing tank body is relatively complex, and there are many grooves and through-hole designs. Once washed with water, the water deposits in the body is not easy to dry, and the parts are easy to rust.
2、不能够给混凝土搅拌罐车的轮胎栓螺母涂油,不少司机认为给轮胎栓螺母涂润滑油能够避免螺栓螺母生锈,事实上,这种做法是非常危险的,因为它会给搅拌车行车带来非常大的隐患。螺栓和螺母拧紧之后本身是有自锁特点的,而润滑油则会让自锁系数下降。搅拌罐运作过程中,螺栓螺母一旦松动就会产生事故。
2. It is not allowed to oil the tire bolts and nuts of the concrete mixing tank truck. Many drivers think that coating the tire bolts and nuts with lubricating oil can prevent the bolts and nuts from rusting. In fact, this practice is very dangerous, because it will bring great potential safety hazards to the driving of the mixing truck. Bolts and nuts have self-locking characteristics after being tightened, while lubricating oil will reduce the self-locking coefficient. During the operation of the mixing tank, once the bolts and nuts are loosened, safety accidents will occur.
3、电喷车启动时候不能踩油门,一旦踩油门了,那混凝土搅拌罐车发动机会出现启动不良的状况。
3. Do not step on the accelerator when starting the EFI truck. Once the accelerator is stepped on, the engine of the concrete mixing tank truck will not start well.
以上就是为大家介绍的有关全自动上料搅拌机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.shanqijituan.com/
The above is a detailed introduction to the automatic feeding mixer, and we hope it will be helpful to you. If you have any questions, you are welcome to contact us. We will provide services for you with our attitude http://www.shanqijituan.com/

 

首页 产品 电话 置顶