混凝土搅拌机是日常行业中常用的一种设备,在工地上是常见物品,虽说这工地常见设备,对其操作肯定没问题,但是混凝土搅拌机的操作是依照正常的操作规程运用的吗?轴承关于混凝土搅拌机是为之重要的,是这台设备运转的关键,所以需求对轴承定期做保养,下面小编为大家细致引见,感兴趣的小伙伴能够一同理解一下哦!
The concrete mixer is a kind of equipment commonly used in the daily industry, and it is a common item on the construction site. Although the common equipment on the construction site is no problem for its operation, is the operation of the concrete mixer in accordance with the normal operating procedures? Bearing is important for the concrete mixer, and is the key to the operation of the equipment. Therefore, it is necessary to maintain the bearing regularly, The following is a small series of detailed introductions, interested partners can understand together Oh!
一、混凝土搅拌机操作规程
1、 Safety operation rules for concrete mixer
1、搅拌机装置就位、基础有必要坚实,支架或支脚筒架安定,不准以轮胎替代支持。
1. The mixer device is in place, the foundation is necessary to be solid, and the support or support tube frame is stable. It is not allowed to replace the support with tires.
2、开搅拌机前应查看离合器、控制器、钢丝绳等功用出色,滚筒内不得有异物。
2. Before starting the mixer, check that the clutch, controller, wire rope and other functions are excellent, and there must be no foreign matter in the drum.
3、进料斗升起时,制止任何人在料斗下经过或逗留,作业完毕应将料斗固定好。
3. When the feeding hopper is raised, stop anyone from passing or staying under the hopper, and fix the hopper after operation.
4、机械工作时,制止将工具伸进滚筒内。
4. When the machine is working, it is forbidden to extend the tool into the drum.
5、制止无证操作,制止操作时擅自脱离作业岗位。
5. Stop the operation without certificate and leave the post without permission.
6、机械维修时,应固定好料斗,堵截电源,进入滚筒维修时外面应有人监护。
6. During mechanical maintenance, the hopper should be fixed and the power supply should be cut off. When entering the drum maintenance, there should be someone outside to monitor.
7、作业完毕后应清洗机械、整理机械四周,做好润滑养护,堵截电源锁好箱门。
7. After the completion of the operation, the machinery should be cleaned and cleaned, the lubrication and maintenance should be done, the power supply should be cut off and the box door should be locked.
二、混凝土搅拌机轴承保养
2、 Bearing maintenance of concrete mixer
1、做好光滑工作
1. Do a good job of smoothing
及时做好轴承的光滑工作,能够保证设备工作还能够保证轴承的寿数延伸。光滑油脂的选择应依据运用地址、气温等条件来选择,每三个月改换一次。换新油时有必要用洁净的汽油或火油清洗轴承与轴承座内污物。
Timely smooth work of bearing can ensure the equipment work and the bearing life extension. The selection of smooth grease should be based on the use of address, temperature and other conditions, change once every three months. It is necessary to use clean gasoline or kerosene to clean the dirt in bearing and bearing seat when changing new oil.
2、远离污染物
2. Keep away from contaminants
轴承是相比照较精细的部件,假如轴承和它的光滑剂不能远离污染物,那么轴承将无法有效地运转。在调查中我们发现,一切过早失效的轴承中少有14%要归因于污染问题。所以,用户一定要使轴承及其光滑剂远离污染。
A bearing is a relatively fine part. If the bearing and its lubricant cannot be kept away from pollutants, the bearing will not be able to operate effectively. In the investigation, we found that at least 14% of all premature failure bearings were due to contamination. Therefore, the user must keep the bearing and its lubricant away from pollution.
3、控制好温度
3. Control the temperature well
普通来讲,轴承在工作运转时会升温,经过一段时间,即以较低温度(通常比室温高10~40度)处于常态。当轴承温度未到达常态而呈现异常升温时,应尽快停机且采取必要对策。
Generally speaking, the bearing will rise in temperature during operation, and after a period of time, it will be in normal state at a lower temperature (usually 10-40 degrees higher than the room temperature). When the temperature of the bearing does not reach the normal state and presents abnormal temperature rise, the machine should be shut down as soon as possible and necessary countermeasures should be taken.
The above is about the concrete mixer safety operation procedures and bearing maintenance introduction, I hope to help you, if you want to know more, welcome to click the automatic feeding mixer http://www.shanqijituan.com Official website.